DIN Standard Round Pipe Caps Details:
Meterial:polyethylene PE80 ,PE100
Tempreture:Below 40℃
Nominal pressure:0.4-1.6Mpa
Nominal diameter: φ20-φ1000
Usage:Municipal water supply, construction water supply, agricultural irrigation area
Interface mode: Hot melt butt, hot melt socket, flange connection, electric fuse socket.
Advangtage:Material non-toxic
anti-corrosion
non-scaling, high impact resistance
light weight
50 years of lifetime
Smooth inner wall
Small frictional resistance
Attention: black pipe with 3-4 bule lines,bule line should be buried underground.
Execution standard:GB/T13663-2000 GB/T13663.2-2005
Advantages:
Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
Corrosion Resistant: resist chemical matters or electron chemical corrosion
Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system
Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipe
Longevity: more than 50 years under proper use
+8615131197059
